Oxygen Analysers

Precise purging is essential for controlling weld quality, particularly when welding high-alloy, corrosion-resistant materials that are highly sensitive to oxygen in the welding process.

Our oxygen analysers can be connected to the Tigtronic Orbital and Integral Controllers for monitoring ID Purge quality as part of the programmed weld schedule parameters, values measured during welding will also be recorded as part of the weld data recording facility.

The maximum oxygen value (in ppm) is entered in the controller (typically 20-30ppm). Welding will not commence until the measured value drops below the programmed threshold. Since oxidation starts at around 30ppm analysers with values displayed as a percentage are not recommended (i.e. 0.1% = 1,000ppm).

Orbitec manufacture 2 models of oxygen analysers, the Oxy-2 and the Oxy-Integral with a selection of accessories and consumables.

ORBITEC LIMITED

Unit 40 Royal Scot Road
Pride Park
Derby
DE24 8AJ
UK

Tel: +44 845 165 1917
Fax: +44 845 165 1817

info@orbitecuk.com www.orbitecuk.com